The creasing machine is a machine used to cut various sheet materials, such as cardboard, corrugated cardboard, plastic and leather. It is widely used in printing, packaging, decoration and plastic industries. Divided into manual creasing machine, automatic creasing machine.

Benefits of centralized lubrication system of automatic creasing machine:

The centralized lubrication system of the automatic creasing machine ensures good lubrication and reduces equipment wear. Make the service life of the creasing machine longer.

The structure of the creasing machine is not complicated, so it is relatively convenient to use, but if it is not maintained correctly, it will still cause some failures. Before using the creasing machine, the user must read the manual carefully, and then use, adjust, and maintain it according to its requirements, so as to ensure that the machine can operate normally and the quality of the products produced is also guaranteed.

Always check the various parts of the machine to see if there are any abnormalities and whether the parts are in good condition. If any damage or abnormality is found, the parts should be replaced or repaired in time. If the machine often makes abnormal noises, analyze the cause in time, then eliminate the fault, and wait until it is normal before using it.

When the machine is pressing and cutting, no metal or hard objects can be transferred into the working surface, otherwise it will cause serious damage to the machine, and the gain will not be worth the loss. When the machine is working, it is necessary to clean up the debris in time to prevent some debris from entering the guide rail surface and causing failure. In addition, it is necessary to pay attention to the pressure and cutting can not exceed the machine's bearing capacity, and maintain the balance and symmetry of the one-sided and the plate distance. Appropriately add some lubricating oil each time before starting the machine. After starting the machine, check the safety device to ensure that the work is carried out safely. The electrical system of the machine must have good insulation to prevent the machine from getting damp.

For more product information, click here: digital creasing machine.